Product ::- Fire Alarm Control Panel
 
STANDARD MODEL
 Datatakex :
Microprocessor based 6 to 12 Zone Fire Alarm Panel.
4 x 16 character LCD Display.
Built in Real Time Clock.
100 event data logger with date & time stamp.
Flashing window indications for common tire & fault.
485 Repeater enabled.
Can be attached with any other ASES panel with 485 data transfer.
Optional printing facility for data.
Useful for Govt. & Private Sector Buildings.
  PA System, Autodialer connections facility (optional).
  Extra Potential free contact for f re & fault.

 Technical Specification:

a) Power Supply : 230 V AC, 50hz
24 V DC
b) Operating Voltage : 24 V DC
c) Normal Loop voltage : 22.5 V DC
d) Hooter Voltage : 24 V DC
e) Operating condition : -10 to 55 degree centigrade, 40 to 95RH
f) EOL : 4k7
g) Panel Colour : Simens Gray/ Marble White/ Blue
  Fire Scan (2 To 4 Zone):
16x2 character LCD display facility.
2 to 4 zone expandable.
inbuilt battery charger & Battery box facility.
Protected from Hi-Voltage, Over load, short circuit.
Provision for repeater & mimic panel.
Auto dialer connectivity facility.
Extra potential free contact for fire & Fault.
Zonewise manual testing facility.
Zone isolation facility.
PA System, Autodialer connections facility (optional).
  Zonewise LED indication for fire, open, short.
     
Technical Specification:
a) Power Supply : 230 V AC, 50hz
24 V DC
b) Operating Voltage : 24 V DC
c) Normal Loop voltage : 23 V DC
d) Hooter Voltage : 24 V DC
e) Operating condition : -10 to 55 degree centigrade, 40 to 95RH
f) EOL : 4k7
g) Panel Colour : Simens Gray/ Marble White
Fire Scan (6 To 8 Zone):
Advance Micro controller based Fire Alarm Panel.
6to 8 zone Expandable.
16x2 character LCD Display.
Mains, A. C. Fail, fuse, Charging, Rev. Batt. Indication.
Zone wise fire, open, short LED indications
Zone wise fire, open, short testing facility.
Zone healthy indications.
Zone isolations facility through switch.
Extra Potential free contact for fire & fault
Trickle & fast charging facility.
  Reset ,alarm cancel, Lamp test, controls etc.
  Compatible with any make smoke & heat detector.
  485 Communication for Repeater & Mimic Panels.
Common fire, fault annunciation facility.
Technical Specification:
a) Power Supply : 230 V AC, 50 Hz / 24 V DC
b) Operating Voltage : 24 V DC
c) Normal Loop voltage : 23.20 V DC
d) Alarm o/p : 24 V DC
e) E.O.L. : 4K7
f) Color of the Panel : Siemens Gray/Marble White/Red
g) Communication Wise : Single pair of twisted cable.
  Delta (Gas Release Panel):
Fully confirms IS 2189
Operates on 230 V AC, 50 Hz AC supply
Battery backup with built in charger
Zone wise fire / fault status in unambiguous colored LED indications.
System On, AC fail, silence visual indications.
Battery Low& Common fire/fault indications
Two mode selection facility (Auto/Manual).
Cross zoning facility.
Gas Inhibition and Instant Release Facility
Manual Gas Release without timer
  Actuator Pressure Low Sensing
  Feather touch switches for auto/manual mode selection, manual release, manual abort,
  Disable operations.
UP/DOWN switch for delay time setting
External s/w for reset, Silence, Lamp test.
Sov line monitoring facility and line status through LED display
LED indication for valve operations and gas discharged.
7-segment display for discharged delay time setting.
Key lock for enabling and disabling of control switches
Relay O/P for actuators.
Common fire, fault and predischarge potential free contacts.
Enough inside space for battery
Attachable with all types of fire detectors.
Rugged CRCA sheet with powder coated finish
 Technical Specification:
a) AC Power : 220v AC, 50Hz ± 10%
b) Standby : 24 V DC
c) Operating Temperature : 0°C to 40°C
d) Operating Humidity : 95% (non-condensing)
       
  Zone Operating Condition
a) Normal Loop Voltage : 23v DC
b) Open Threshold Current : 4.4 mA
c) Short Threshold Current : 35 mA
d) Fire Threshold Current : 15 – 35 mA
e) Alarm Outputs Hooter Output : 750mA @24v DC (Normal)
       
  NB: Hooter output current can be increased as per customer requirement.
Remote Outputs
a) Fire Contact1 (C,NO,NC) : 240v AC@2A /24v DC@ 5A
b) Fault Contact (C,NO,NC) : 240v AC@2A /24v DC@ 5A
Red Body (Automatic Panel):
Modular design, plug in type solid state.
Gold plated finger type PCBS.
Expandable up to 2 to 50 zone Fire Alarm Panel.
Each zone with fire, open, short indication & sound.
Associate with P.A. System, talk back system, Auto dialer etc.
Battery charger Battery Box facility.
Mains, AC fail, Rev. Battery, fuseblown, fault isolate indication.
Compatible with any make smoke & Heat sensor
ERTL tested as per IS: 2189.
     
  Technical Specification:
a) Power Supply : 230 V AC, 50hz
24 V DC
b) Operating Voltage : 24 V DC
c) Normal Loop voltage : 23 V DC
d) Hooter Voltage : 24 V DC
e) Operating condition : -10 to 55 degree centigrade, 40 to 95RH
f) EOL : 2k2
g) Panel Colour : Red
Red Body (Manual Panel):
Modular design, plug in type solid state.
Gold plated finger type PCBS.
Expandable up to 2 to 50 zone Fire Alarm Panel.
Each zone with fire & short indication & sound.
Associate with P.A. System, talk back system, Auto dialer etc.
Battery charger Battery Box facility.
Mains, AC fail, Rev. Battery, fuseblown, fault isolate indication.
   
   
     
  Technical Specification:
a) Power Supply : 230 V AC, 50hz
24 V DC
b) Operating Voltage : 24 V DC
c) Normal Loop voltage : 23 V DC
d) Hooter Voltage : 24 V DC
e) Operating condition : -10 to 55 degree centigrade, 40 to 95RH
f) EOL : 2k2
g) Panel Colour : Red
  Fire Bus:
Inbuilt MCB & Hooter with single zone Fire Alarm Panel.
Battery charger & Battery backup facility.
Best usage for shops, showrooms, factories, houses, temporary locations, schools.
Small size, light weight, cylindrical shape.
Compatible with up to 8 smoke detector (any make).
System off, system normal, system silence facility.
System healthy, fire, A.C. fail indications.
External Hooter & MCB connectivity facility.
Inbuilt hooter without strobe optional.
   
     
Technical Specification:
a) Power Supply : 230 V AC, 50hz
12 V DC
b) Operating Voltage : 12 V DC
c) Normal Loop voltage : 11.5 V DC
d) Hooter Voltage : 12 V DC
e) Operating condition : -10 to 55 degree centigrade, 40 to 95RH
f) EOL : NA
g) Panel Colour : Red
 Blizzard (Security Panel):
Fire Zone, Intruder zone, temperature sensing zone panels.
LCD (16x2) (optional) facility.
Smoke detector, door Magnetic contact, RTD Rod connection.
Exit delay & temperature range variable facility.
Best usage for small telephone exchange (Mobile Tower).
Extra potential free contact for fire, temperature, intruder.
Lamp test, rest, silence, self test facility.
Hi speed micro controller based fire, intruder, temperature panel
   
     
Technical Specification:
a) Power Supply : ± 48 V DC
24 V AC
b) Operating Voltage : 24 V DC
c) Normal Loop voltage : 22 V DC
d) Normal Temp. Loop Voltage : 4 V DC
e) Alarm o/p Voltage : 24 V DC
f) Fire E.O.L. : 4K7
g) Temp E.O.L. : 150 Ohm
h) Colour of the Panel : white
 Automatic Panel With P.A. System:
Modular design, plug in type solid state.
Gold plated finger type PCBS.
Expandable up to 2 to 50 zone Fire Alarm Panel.
Each zone with fire open short indication & sound.
Associate with P.A. System, talk back system, Auto dialer etc.
Battery charger & Battery Box facility.
Mains, AC fail, Rev. Battery, fuse blown, fault isolate indication.
Compatible with any make smoke & Heat sensor.
Tested by ERTL as per IS : 2189.
   
   
   
   
   
   
     
Technical Specification:
a) Power I/P : 230 V . AC
24 V. DC
b) Housing Color : Red Body
c) No. of Zone : 2 to 50 Zone
d) End of Line : 2k 2Ω
e) Power Consumption : 100 watt /500 watt (Normal / Fire)
f) Weight (Without Batt.) : 15 Kg. (2 Zone)
g) Dimensions : Customized
h) Detection O/P Supply : 24 V. DC
i) Hooter O/P Supply : 24 V. DC
j) P.A. System : Ahuja / Philips
       
Talk Back System:
 
Talk Back Unit (Simplex Type)
Talk Back Unit as per IS: 2189.
Simplex type talk back unit.
Prevention for unauthorized uses.
Best use in multi-stories building.
Simple operation (Press to talk unit)
   
   
     
 
Talk Back Unit (Duplex Type)
Talk Back Unit as per IS: 2189.
Duplex type talk back unit.
Prevention for unauthorized uses.
Best use in multi-stories building.
Simple operation (Pick & talk Facilities).
   
   
     
 
Talk Back Master Panel
Customized Talk Back master station.
Used for two way communication.
Simplex type talk back with connectivity.
5 to 50 Zone expandable.
Simple operation (Press to talk facilities).
Talk back panel as per IS standards.
Best used in multistoried building.
     
 Technical Specification:
Specification Simplex Duplex Talk Back Master Panel
Power I/P 12 V Dc 12 V Dc 230 V AC /12 V Dc
Power Consumption 5 Watt 8 Watt 30 Watt
Housing M.S. ABS M.S.
Weight 1.5 Kg. 1 Kg. 10.5 Kg.
Dimensions (mm) 130 x 210 x 80 90 x 225 x 75 400 x 350 x 125
Color Red Red Simens Grey
Speaker Philips Philips Philips
Precision:
Advance Micro controller based Fire Alarm Panel.
8 to 48 zone Expandable.
16x2 character LCD Display.
Mains, A. C. Fail, fuse, Charging, Rev. Batt. Indication.
Extra Potential free contact for fire & fault.
Trickle & fast charging facility.
Reset alarm cancel, Lamp test, controls etc.
Compatible with any make smoke & heat detector.
485 Communication for Repeater & Mimic Panels.
Zonewise LED indications for fire & Fault (Optional).
  Zone isolation facility (Optional)
     
Technical Specification:
a) Power Supply : 230 V AC, 50 Hz / 24 V DC
b) Operating Voltage : 24 V DC
c) Normal Loop voltage : 22 V DC
d) Alarm o/p : 24 V DC
e) E.O.L. : 4K7
f) Color of the Panel : Siemens Gray/Marble White/Red
g) Communication Wise : Single pair of twisted cable.
Semi-Addressable Fire Alarm System:
Feature:
40X2 character LCD foi all event &massage display.
4 Wire Communicator in loop with all active & passive Repeater, Monitor modules control modules etc.
Alarm Verification
Zone evacuation facilities.
Up to 30 addresses in single loop panel.
Conventional detectors MCBS, RIS, Hooters in loop by 485 communication.
Voice evacuation & PAsystem interfacing.
Optional printing facility for data.
AutoDialer connectivity.
Extra potential free contacts to fire 8. fault.
Separate LED indication for normal, fire & fault for each devices.
  Technical Specification:
a) Power supply : 230 V . AC
24 V. DC
b) Operating Condition : -7 degc to 52 degc , 40-95% rh.
c) Operating Voltage : 24 V DC
d) Normal Loop Voltage : 22 V DC
e) Power o/p for Loop : 24 V DC
f) E.O.L. : 4K7
g) Colour of the Panel : Siemens Gray
h) Alarm o/p : 24 V DC
i) Communication Wise : Single pair of twisted cable.
       
REPEATER PANEL
  Rover:
RS 485 repeater for main panels.
Only 4 wire needed to repeater up to 96 zone.
16x2 line display to show the status of main panels.
Fire & fault contacts available.
Led indications for alarm & fault.
No separate wiring required.
Small in size.
Zone wise repeating.
Compatible with all ASES 485 networking.
     
 Technical Specification:
a) Power Supply : 24 V DC
b) Operating Voltage : 24 V DC
c) Normal Loop voltage : NA
d) Hooter Voltage : 24 V DC
e) Operating condition : -10 to 55 degree centigrade, 40 to 95RH
f) EOL : NA
g) Panel Colour : Simens Gray/ Marble White
  Black box:
RS 485 data logger panel.
Compatible with all ASES 485 networking.
1000 event storage capacity.
Print without a computer facility.
Error free data storage.
Hi-speed processed data logging system.
16x2 line LCD display
Zone wise repeating.
Compatible with all ASES 485 networking.
     
 Technical Specification:
a) Power Supply : 24 V DC
b) Operating Voltage : 24 V DC
c) Normal Loop voltage : NA
d) Hooter Voltage : 24 V DC
e) Operating condition : -10 to 55 degree centigrade, 40 to 95RH
f) EOL : NA
g) Panel Colour : Simens Gray/ Marble White
Repeater panel:
Micro controller based/conventional type panel.
LED display.
Compatible with 485 communication (micro controller based).
Zone wise fire & fault indication.
Reset, alarm cancel, fault isolate facility.
Associate with any make main fire alarm panel.
Used for signal repeater for fire panel.
   
   
     
  Technical Specification:
a) Power I/P : 24 V DC
b) Housing Color : Red / White
c) No. Of Zone : Customised
d) End of line : NA
e) Power consumption : 20 Watt Max.
f) Weight (without Batt.) : Customised
g) Dimensions (mm) : Customised
h) Detection o/p : NA
i) Hooter o/p : NA
       
Mimic panel:
Conventional type customized mimic panel.
Different color of zone line indication.
Auto-cad based mimic plan pasted on acrylic sheet.
Reset, alarm cancel, fault isolate facility.
Usage for finding of fire origin.
Also usage for evacuation plan.
Associate with any make fire alarm panel.
   
     
 Technical Specification:
a) Power I/P : 24 V DC
b) Housing Color : Red / White
c) No. Of Zone : Customised
d) End of line : NA
e) Power consumption : 20 Watt Max.
f) Weight (without Batt.) : Customised
g) Dimensions (mm) : Customised
h) Detection o/p : NA
i) Hooter o/p : NA
       
ACCESSORIES
  Fire Alarm Sounder
 
Hooter Hi-Intensive (M.S.-I)
Extra Hi-Intensive sound (upto 120db).
Tested by ERTL as per IS: 2189.
Best uses in sound polluted areas
Available in three different tones.
Available in electrical operation
   
   
     
 
Hooter Low-Intensive (M.S.-II)
Hi-Intensive sound (80 to 100 db).
Tested by ERTL as per IS: 2189.
Available in three different tones.
Available in electrical operation
   
   
   
     
 
Hooter with Flasher(M.S.-III)
Hi-Intensive sound (80 to 100 db).
Tested by ERTL as per IS: 2189.
Best uses in sound polluted areas.
LED flasher with wailing tone.
   
   
   
     
 
Electrical Siren(M.S.-IV)
(1 Km to 10 km range)
A.C & Battery operated siren.
Use fall for factories, Societies, Big Building.
Different types of mounting facility.
Hand operated siren is available.
Different shapes & ranges are available.
     
Technical Specification:
Specification Hi-Intensive
M.S.-I
Low-Intensive
M.S.-II
Flasher
M.S.-III
Electric Siren
M.S.-IV
Power I/P 220 V AC
24 V DC
220 V AC
24 V DC
220 V AC
24 V DC
220 V AC
24 V DC
Sound O/P 120 dB 100dB 100dB 120 dB
Current Consumption 480 MA 200 MA 350 MA Customised
Housing M.S. Sheet M.S. Sheet M.S. Sheet Aluminum di. Cast
Weight 2.5 Kg 1.2 Kg 1.2 Kg 3 Kg. / Customised
Dimensions(mm) 180 x 225 x 90 130x 180 x 80 130x 180 x 80 Customised
Color Red Red Red Red
Speaker ASES /Philips ASES /Philips ASES /Philips NA
 Fire Alarm Hooters:
 
Hooter ABS Body (ABS -I)
Fire Alarm in New attractive look.
Different colors are available.
Different tones are available.
Connector is plug in type.
Suitable for Malls. Restaurants, Banks etc.
     
 
Hooter ABS Body (ABS -II)
Fire Alarm in New attractive look.
Different colors are available.
Different tones are available.
Connector is plug in type.
Suitable for Malls. Restaurants, Banks etc.
   
     
 
Hooter ABS Body (ABS -III)
Fire Alarm in New attractive look.
Different colors are available..
Different tones are available.
Connector is plug in type.
Suitable for Malls. Restaurants, Banks etc.
   
     
 
Hooter with Strobe (ABS-IV)
Hooter with strobe type flasher.
Fire Alarm in New attractive look..
Different colors are available.
Different tones are available.
Connector is plug in type.
Suitable for Malls, Restaurants, Banks etc.
Used in sound polluted sites like factories etc.
     
  Technical Specification:
Specification Hooter (ABS-I) Hooter (ABS-II)
& ABC-III
Hooter with Strobe
(ABS-IV)
Power I/P 24 V DC 24 V DC 24 V DC
Sound O/P 110dB 110dB 110Db with Flasher
Current Consumption 350 MA 350 MA 350 MA
Housing PVC/ABS PVC/ABS PVC/ABS
Weight 600gm. 600gm. 650gm.
Dimensions(mm) 115 x 115 x 70 115 x 115 x 70 115 x 115 x 70
Color Red/ Blank Red/ White Red
       
Manual Call Box:
 
M.C.B. MS Type
Compatible with any make Fire Alarm Panel.
Manual Call Point as per IS: 2189.
Approved from maximum Govt. Sectors.
Chain Hammer Facility.& Blinking facility (option)
   
   
   
     
 
MCB (ABS-I)
Compatibility with all conventional fire control panel.
Alarm test key facilities.
Glass protected by thin film.
Wall mounted.
LED blinking facility (optional).
   
     
 
MCB (ABS-II)
Compatibility with all conventional fire control panel.
Alarm test key facilities.
Glass protected by thin film.
Wall mounted.
LED blinking facility (optional).
     
 
Manual Release Unit (MR-I)
Used as manual Gas release unit
Compatible with any gas release panel
Glass protected by thin film
   
   
     
 
Manual Abort Unit(MA-I)
Used as manual Gas release unit
Compatible with any gas release panel
Glass protected by thin film
LED blinking facility (optional).
   
     
Technical Specification:
Specification M.C.B. MS Type M.C.B.
ABS-I
ABS-II Manual Release Unit (M.R.-I) Manual Abort Unit (M.A.-I)
Power I/P 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC
Current Consumption (Normal /Fire) NA / 30MA NA / 30MA NA / 30MA NA / 30MA NA / 30MA
Housing M.S. ABS ABS ABS ABS
Weight 750gm. 150 gm. 150 gm. 159 gm. 150 gm.
Dimensions(mm) 120 x 90 x 55 85 x 85 x 50 85 x 85 x 50 85 x 85 x 50 85 x 85 x 50
Color Red Red Red Green Yellow
           
  Response Indicators:
 
Response Indicators (M. S. Back)
Compatibility with all detectors.
Dual lamp.
ABS + MS Body.
Wall Mounted / ceiling mounted.
   
     
 
Response Indicator (M.S.)
Compatibility with all detectors.
Dual lamp.
M.S. Body
Wall Mounted / ceiling mounted.
   
     
 
Response Indicator (M.S.) Mini
Compatibility with all detectors.
Dual lamp.
M.S. Body
Wall Mounted / ceiling mounted.
   
     
 
Response Indicator (P. S. Mini R)
Compatibility with all detectors.
Dual lamp.
ABS Body.
Wall Mounted / ceiling mounted.
   
     
 
Response Indicator (P. S. Mini W)
Compatibility with all detectors.
Dual lamp.
M.S. Body.
Wall Mounted / ceiling mounted.
   
     
 Technical Specification:
Specification M.S. Back M.S.
M.S. Mini P.S. Mini R P.S. Mini W
Power I/P 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC
Current Consumption 5 MA 5 MA 5 MA 5 MA 5 MA
Housing ABC + MS MS MS ABS ABS
Weight 300 gm. 400 gm. 200 gm. 50 gm. 50 gm.
Dimensions(mm) 65 x 55 x 35 75 x 100 x 50 65 x 65 x 40 65 x 55 x 35 65 x 55 x 35
Color White White White Red White
           
 
Zone Card (AS-4)
Zone Module for conventional type panels.
Plug in type, Modular design.
Solid state circuitry, gold plated fingers.
Used in red body panel.
   
     
 
Control Card (AS-2)
Control Module for conventional type panels.
Plug in type, Modular design.
Solid state circuitry, gold plated fingers.
Used in red body panel.
   
     
 
Power Supply Card (AS-3)
Power Module for conventional type panels
Plug in type, Modular design.
Solid state circuitry, gold plated fingers.
Used in red body panel.
   
     
 
Manual Card (AS-5)
Manual zone Module for conventional type panelsels
Plug in type, Modular design.
Solid state circuitry, gold plated fingers.
Used in red body panel.
   
     
 
Auto Dialer (AS-DIAL)
16 X 2 character LCD Display (optional).
Micro processor based Auto Dialer.
Compatible with any fire alarm panel.
Up to 10 lines calling facilities.
   
     
SINAGES & EMERGENCY LIGHTS
Signages & Emergency Lights
Direction:
ASD 1 ASD 2 ASD 3 ASD 4 ASD 5 ASD 6
ASD 7 ASD 8 ASD 9 ASD 10 ASD 11  
 
Fire Equipment :
ASEF 1 ASEF 2 ASEF 3 ASEF 4 ASEF 5 ASEF 6
ASEF 7 ASEF 8 ASEF 9 ASEF 10 ASEF 11 ASEF 12
Combination:
ASC 1 ASC 2 ASC 3 ASC 4 ASC 5  
 
ASC 6 ASC 7 ASC 8 ASC 9    
ASC 10
ASC 11
Prohibition:
ASP 1 ASP 2 ASP 3 ASP 4 ASP 5 ASP 6 ASP 7 ASP 8 ASP 9
           
ASP 10 ASP 11 ASP 12 ASP 13 ASP 14
Safety:
ASS 1 ASS 2 ASS 3 ASS 4
ASS 5 ASS 6 ASS 7 ASS 8
Warning:
ASW 1 ASW 2 ASW 3 ASW 4 ASW 5
ASW 6 ASW 7 ASW 8 ASW 9 ASW 10
Space Identification :
ASSI 1 ASSI 2 ASSI 3
ASSI 4 ASSI 5 ASSI 6
IMO Safety :
ASIS 1 ASIS 2 ASIS 3 ASIS 4 ASIS 5 ASIS 6 ASIS 7
ASIS 8 ASIS 9 ASIS 10 ASIS 11 ASIS 12 ASIS 13 ASIS 14
General:
ASG 1 ASG 2 ASG 3 ASG 4
ASG 5 ASG 6 ASG 7 ASG 8
 Signages & Emergency Lights :
 
Exit Led Type (ASESLITE - LED)
Nl- CD Rechargeable battery.
2 hours backup/16 hours recharging period.
Constant current charger
Self Contained rechargeable exit signs.
Best used in Malls, Multiplexes, Hospitals, Multistoried.
  Customized signs are available.
 
Exit Bulb Type (ASESLITE - Bulb)
220 V AC OPERATED exit sign box.
Low cost, Easy Installation, Easy Maintenance.
Self contained Exit sign box.
Best uses in societies, Multistory, Pvt Sites.
Customized signs are available.
     
 
Exit Laser Type (ASESLITE - Laser)
Customized laser etching on Arylic Sheet.
Different sizes & designs are available.
NI-CD Battery (Rechargeable) backup.
1/2 hour backup/ 6 to 8 hours recharging period.
Self contained rechargeable exit signs.
Best uses in Malls, Multiplexes, Hospitals, Hotels.
   
   
   
 
Exit CFL Type (ASESLITE - CFL)
Customized sizes & designs are available.
NI-CD Battery (Rechargable) backup.
1 hour backup/ 6 to 8 hours recharging period.
Self contained rechargeable exit signs.
Best uses in Malls, Multiplexes, Hospitals, Hotels
     
 
Exit CFL Type (ASESLITE - Decor)
Customized sizes & designs are available.
NI-CD Battery (Rechargable) backup.
1 hour backup/ 6 to 8 hours recharging period.
Self contained rechargeable exit signs.
Best uses in Malls, Multiplexes, Hospitals, Hotels
     
Technical Specification:
Specification ASESLITE -
LED
ASESLITE –
Bulb
ASESLITE –
Laser
ASESLITE –
CFL / Decor
Power I/P 220 V. A C
12V. Dc
220 V. A C
12V. Dc
220 V. A C
12V. Dc
220 V. A C
12V. Dc
Housing M.S. & Acrylic M.S. & Acrylic M.S. & Acrylic M.S. & Acrylic
Power Consumption 30 Watt 10 Watt 35 Watt 30 Watt
Weight 6 Kg. 2 Kg. 2 Kg. 5 Kg.
Dimensions (mm) 380 x 270 x 90 253 x 152 x 102 Customized Customized
Color 180 x 225 x 90 130x 180 x 80 Customized Customized
Batt. Backup 1 Hour NA 1 Hour 1 Hour
         
Signages & Emergency Lights :
 
Exit Surface Backlit Type (ASESLITE - 001)
Customized design & size are available.
NI-CD Battery (Rechargeable) backup.
1 hour backup/ 6 to 8 hours recharging period.
Self contained rechargeable exit signs.
Best uses in Malls, Multiplexes, Hospitals, Hotels
     
 
Exit Big Surface Backlit Type (ASESLITE - 002)
Customized design & size are available.
NI-CD Battery (Rechargeable) backup.
1 hour backup/ 6 to 8 hours recharging period.
Self contained rechargeable exit signs.
Best uses in Malls, Multiplexes, Hospitals, Hotels
     
 
Exit CFL White (ASESLITE - 003)
Customized design & size are available.
NI-CD Battery (Rechargeable) backup.
1 hour backup/ 6 to 8 hours recharging period.
Self contained rechargeable exit signs.
Best uses in Malls, Multiplexes, Hospitals, Hotels
     
 
Exit V Shape (ASESLITE - 004)
Customized design & size are available.
NI-CD Battery (Rechargeable) backup.
1 hour backup/ 6 to 8 hours recharging period.
Self contained rechargeable exit signs.
Best uses in Malls, Multiplexes, Hospitals, Hotels
     
 
Exit Decoration (ASESLITE - 005)
Customized design & size are available.
NI-CD Battery (Rechargeable) backup.
1 hour backup/ 6 to 8 hours recharging period.
Self contained rechargeable exit signs.
Best uses in Malls, Multiplexes, Hospitals, Hotels
     
Technical Specification:
Specification ASESLITE
001
ASESLITE
002
ASESLITE
003
ASESLITE
004
ASESLITE
005
Power I/P 230 V AC
12 V DC
230 V AC
12 V DC
230 V AC
12 V DC
230 V AC
12 V DC
230 V AC
12 V DC
Power Consumption 30 Watt 30 Watt 30 Watt 30 Watt 30 Watt
Housing M.S. & Acrylic M.S. & Acrylic M.S.& Acrylic M.S. & Acrylic M.S. & Acrylic
Weight As Product As Product As Product As Product As Product
Dimensions(mm) Customised Customised Customised Customised Customised
Color Customised Customised Customised Customised Customised
Batt. Backup Hours 1 Hours 1 Hours 1 Hours 1 Hours 1 Hours
 Signages & Emergency Lights :
 
Spot Light (Beam Type)
2 X 10 W TUNGSTEN halogen lamp.
SLA rechargeable battery back up.
1 hour backup/10 hours recharging period.
Portable attractive Halogen twin light rechargeable unit.
Best uses in Malls, Multiplexes, Factory etc.
     
 
Search Light (Halogen-l)
Rechargeable Halogen search light is developed for use by CISF, BSF, Mines, Railways, Police, Customs etc.
Environmentally friendly and splash proof.
1 x 50 watt tungsten Halogen lamp.
Equipped with push test switch
   
 
Search Light (Halogen-ll)
Rechargeable Halogen search light is developed for use by CISF, BSF, Mines, Railways, Police, Customs etc.
Environmentally friendly and splash prof.
1 x 35 watt tungsten Halogen lamp.
Equipped with push test switch
   
 
Spot Light (Beam Light With Exit Sign)
2 X 10 W TUNGSTEN halogen lamp.
SLA rechargeable battery back up.
1 hour backup/10 hours recharging period.
Portable attractive Halogen twin light rechargeable unit.
Best uses in Malls, Multiplexes, Factory etc.
     
 
Dura-Light (ASESLITE-Tube)
Well Decorative Table topcom wall mounted model.
2x11 watt CFL tube facility.
UPS circuit for continuous glowing.
Attractive power coated M.S. Cabinet
   
 
Beam Light (ASESLITE-lmported)
An attractive rounded dome Box suitable.
For wall mounting, portable use.
Automatically switch on mains power failure.
Automatically slides into trickle charge to constantly retain the charge and be ready for immediate use.
   
  Technical Specification:
Specification Spot Light Halogen I Halogen II Spot Light Dura Light Bean Light
Power I/P 230 V AC
12 V DC
230 V AC
12 V DC
230 V AC
12 V DC
230 V AC
12 V DC
230 V AC
12 V DC
230 V AC
12 V DC
Power Consumption 100 Watt 300 Watt 200 Watt 200 Watt 200 Watt 200 Watt
Housing M.S. Aluminum Plastic M.S. M.S. ABS
Weight 5 Kg 4 Kg 3 Kg 5 Kg 6 Kg 4 Kg
Dimensions(mm) Customised Customised Customised Customised Customised Customised
Color Customised Customised Customised Customised Customised Customised
Batt. Backup Hours 1 Hours 1 Hours 1 Hours 1 Hours 1 Hours 1 Hours
FIRE FIGHTING PANEL
Fire fighting panel is the heart of the fire system
It works both manual / auto mode
When pressure drops it runs automatically to protect fire
Operational voltage – 415 V
Easy installation and connection
Bus bar rating up to 1600 A
Wall mounting / floor mounting available
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Shah Industrial Products
Shop No.62, Amidhara Complex, N.H. No.8, Near CNC Gas Station, Char Rasta, GIDC. Vapi-396195. Gujarat - INDIA.
Telefax : +91-260-2422322, Cell : +91-9824506011, 9824031011
E-mail : response@shahfiresafety.in, shahindpro@gmail.com, shahindrpro@yahoo.co.in